Hole Volume Calculator
Result
Hole Volume Calculator: calculate excavation volume (m^3) from explicitly entered values.
Formula
- Model: volume = pi * radius_m^2 * depth_m. Models a cylindrical hole only; nonnegative radius and depth, excluding overbreak, taper, bulking and soil expansion. This calculator uses the supplied inputs and does not provide a certified engineering, medical, or financial assessment.
- The main inputs are Hole radius, Hole depth. Enter them in the units and format shown in the calculator.
- Keep measurements and project assumptions consistent before comparing or combining values.
- Changing any input above recalculates the result with the same calculation engine used by this page.
Example: Hole Volume
- Hole radius: 0.5 m
- Hole depth: 2 m
Using Hole radius (m) = 0.5, Hole depth (m) = 2, the calculated result is Excavation volume (m^3): 1.57079632679.
Sample result: Calculating…
Frequently asked questions
What does the Hole Volume calculate?
Hole Volume Calculator: calculate excavation volume (m^3) from explicitly entered values.
Which values should I enter?
Enter Hole radius, Hole depth using the units and format shown beside each field.
What formula does this calculator use?
The calculator uses the following relationship: volume = pi * radius_m^2 * depth_m.
Why might my result differ from another source?
Results can differ when another source uses different units, rounding rules, conventions or assumptions. Compare the inputs and definitions before comparing results.
Does the result update automatically?
Yes. Changing an input updates the result using the same calculation engine shown on this page.