Steel Pipe Weight Calculator
Result
Steel Pipe Weight Calculator — free online calculator.
Formula
- Steel Pipe Weight Calculator calculates its result from Density, Length, Od, Id. It uses the formula Weight = (π/4) × (OD² − ID²) × Length × Density. Change any input to recalculate the result instantly.
- The main inputs are Outer Diameter (OD), Inner Diameter (ID), Pipe Length, Material. Enter them in the units and format shown in the calculator.
- Keep measurements and project assumptions consistent before comparing or combining values.
- Changing any input above recalculates the result with the same calculation engine used by this page.
Example: Steel Pipe Weight
- Outer Diameter (OD): 2 in
- Inner Diameter (ID): 1.5
- Pipe Length: 10 ft
- Material: steel
Using Density = 2, Length = 3, Od = 4, Id = 5, the calculated result is -42.4115008235.
Sample result: Calculating…
Frequently asked questions
What does the Steel Pipe Weight calculate?
Steel Pipe Weight Calculator — free online calculator.
Which values should I enter?
Enter Outer Diameter (OD), Inner Diameter (ID), Pipe Length, Material using the units and format shown beside each field.
What formula does this calculator use?
The calculator uses the following relationship: Cross-section (in²)=π/4×(OD²−ID²); weight(lb)=section×length(ft)×12/1728×material density(lb/ft³)..
Why might my result differ from another source?
Results can differ when another source uses different units, rounding rules, conventions or assumptions. Compare the inputs and definitions before comparing results.
Does the result update automatically?
Yes. Changing an input updates the result using the same calculation engine shown on this page.